Pentax 12622, 12633 Assist], To Set the Focus Assist Light, Set the timing of autofocusing, To Set the Autofocus Mode (AF Mode)

2 TakingPictures

4 Use the four-way controller (23) to select a focusing area, and press the 4button.

The setting is saved.

• In C (Movie), c(Time-Lapse Movie) and d(High Speed Movie) modes, the focusing area cannot be set to W.

•In 9(Green) and S(Fireworks) modes, the focusing area is fixed at J.

•The [Focusing Area] setting can also be changed using the control panel.

To Set the Autofocus Mode (AF Mode)Set the timing of autofocusing.

AF.S	Activates the autofocus system when the shutter release button is pressed
	halfway.
AF.C	Intermittently activates the autofocus system while the shutter release
	button is kept pressed halfway, maintaining the focus on the subject.

3 Use the four-way controller (23) to select [AF Mode], and press the OK button.

4 Use the four-way controller (23) to select either [AF.S] or [AF.C], and press the OK button.

•The [AF Mode] setting can also be changed using the control panel.

•When you select [AF.C], the [Focusing Area] setting is fixed to J.

To Set the Focus Assist Light

The Focus Assist light aids in focusing on dark subjects. This helps you to focus on the subject in low light conditions where auto focus does not work properly. The Focus Assist light is emitted from the self-timer lamp part.

3 Use the four-way controller (23) to select [FocusAssist].

92