6

7

8

9

10

11

Set the number of shots.

1Press the four-way controller (5).

2Use the four-way controller (23) to set [Number of Shots], then press the four-way controller (5).

The frame returns to [Number of Shots].

Press the four-way controller (3).

The frame moves to [Start Delay].

Set the start delay.

1Press the four-way controller (5).

2Use the four-way controller (23) to set the hours, then press the four-way controller (5).

3Use the four-way controller (23) to set the minutes, then press

the four-way controller (5). The frame returns to [Start Delay].

Press the 3button.

The [Interval Shoot] settings are saved and the camera returns to capture mode.

Press the shutter release button halfway.

The focus frame on the display turns green if the subject is in focus.

Press the shutter release button fully.

Interval shooting starts.

The LCD turns off between shots (during standby). Press the power switch during standby to display the remaining number of shots and interval on the monitor.

The [Stop interval shooting?] message is displayed when the power switch and then the 3button are pressed during standby. Pressing the 4button cancels interval shooting.

• Interval Shoot is unavailable in b(Auto Picture), 9(Green), F (Digital Panorama), X (Digital Wide), S (Fireworks) and O (Voice Recording) modes.

•Even if an alarm is set, the alarm will not ring during interval shooting.

•Interval Shoot stops if the SD Memory Card is removed or inserted during standby.

The Interval Shoot settings can also be configured from the [ARec. Mode] menu. (p.136)

3 TakingPictures

109