Message

Description

 

Displayed when you try to switch to Q mode while an

Data being recorded

image is still being recorded, or when the protect setting or

DPOF setting is being changed. It disappears after the

 

 

image is recorded or the setting is changed.

 

Displayed when the camera takes more than five seconds

Data being processed

to display an image due to image processing, or when the

 

SD Memory Card or the built-in memory is being formatted.

Built-in memory full

Displayed if the built-in memory is full when saving a file.

No image to be

Displayed when there are no images or sound files.

processed

 

This image/sound

Displayed for files that cannot be processed.

cannot be processed

 

 

Displayed if no SD Memory Card is inserted when “Image/

No card in the camera

Sound Copy” is selected from the Playback Mode Palette

 

and the OK button is pressed.

The built-in memory is

Displayed when there is insufficient built-in memory to

not enough to copy

perform copying.

images/sounds

 

 

 

Cannot process

Displayed when Red-eye Compensation processing fails.

correctly

 

Not enough battery

Displayed when the battery is too low during Pixel Mapping.

power remaining to

Change the battery (p.39) or use the AC adapter kit

activate Pixel Mapping

K-AC117 (optional) (p.43).

No more images can be

Displayed when you select more than the maximum

selected

number of images.

The camera will turn off

Appears when the temperature inside the camera exceeds

to prevent damage from

the highest limit.

overheating

 

No more logs can be

Displayed when there is no capacity to save a log in the

recorded.

card, or there is a log with the 999 serial number. (Optio

Delete the record?

WG-1 GPS only)

9 Appendix

288