GPS
GPS
GPS!

*A12 changes as follows depending on the [Eye-Fi] setting in [W Setting] menu.

During Eye-Fi communication. The camera is communicating or searching for the access point when [Eye-Fi] is set to O(on).

Eye-Fi communication waiting. The camera is not communicating when [Eye-Fi] is set to O(on).

Eye-Fi communication prohibited. [Eye-Fi] is set to P(off).

Eye-Fi version error. The version of the Eye-Fi card is out of date.

*A17 depends on the [D-Range Setting] setting in the [ARec. Mode] menu.

P When [Highlight Correction] is set to O Q When [Shadow Correction] is set to O

O When [Highlight Correction] and [Shadow Correction] are both set to O

If [Highlight Correction] and [Shadow Correction] are both set to P (Off), nothing appears in A17.

*A22 changes as follows depending on [GPS] setting in [WSetting] menu.

[GPS Setting] is set to O(On) in [GPS], and the GPS data is received.

[GPS Setting] is set to O(On) in [GPS], but GPS data is not received.

GPS Error (*)

(*)To recover from an error, turn off the camera, remove and then re-insert the battery and turn on the camera again. If GPS! is still displayed, the built-in GPS unit may be malfunctioning. Contact your nearest PENTAX Service Center.

No GPS status icon is displayed on the screen when [GPS Setting] is set to P(Off).

*B1 and B2 are only displayed when the shutter release button is pressed half-way.

*When the shooting mode is b(Auto Picture) and if you press the shutter release button halfway, the automatically selected shooting mode appears in A1 even when “No Info” is selected (p.84).

*Some indications may not appear depending on the shooting mode.

29