GPS
GPS
GPS!

*14 changes as follows depending on the [Eye-Fi] setting in [WSetting] menu.

During Eye-Fi communication. The camera is communicating or searching for the access point when [Eye-Fi] is set to O(on).

Eye-Fi communication waiting. The camera is not communicating when [Eye-Fi] is set to O(on).

Eye-Fi communication prohibited. [Eye-Fi] is set to P(off).

Eye-Fi version error. The version of the Eye-Fi card is out of date.

*17 disappears two seconds after the camera is turned on.

*19 depends on the [D-Range Setting] setting in the [ARec. Mode] menu.

P When [Highlight Correction] is set to O Q When [Shadow Correction] is set to O

O When [Highlight Correction] and [Shadow Correction] are both set to O

If [Highlight Correction] and [Shadow Correction] are both set to P (Off), nothing appears in 19.

*20 changes as follows depending on [GPS] setting in [WSetting] menu.

[GPS Setting] is set to O(On) in [GPS], and the GPS data is received.

[GPS Setting] is set to O(On) in [GPS], but GPS data is not received.

GPS Error (*)

(*)To recover from an error, turn off the camera, remove and then re-insert the battery and turn on the camera again. If GPS! is still displayed, the built-in GPS unit may be malfunctioning. Contact your nearest PENTAX Service Center.

No GPS status icon is displayed on the screen when [GPS Setting] is set to P(Off).

* Some indications may not appear depending on the shooting mode.

27