Pentax 16926, 16961 Changing the Start-upScreen

7 Settings

Changing the Start-up Screen

You can choose the start-up screen displayed when the camera is turned on. You can choose any of the following images as the start-up screen:

• The Guide Display Start-up Screen showing a guide to the shooting modes and buttons

• One of the 3 pre-installed screens

• One of your own images (compatible images only)

1
	In Q mode, press the four-way controller (3).
2	The Playback Mode Palette appears.
	Use the four-way controller
			Start-up Screen	2/2
	(2345) to select ^(Start-
	up Screen).
		For setting a captured
		image as the Start-up
		Screen
		MENU Cancel			OK OK
3
	Press the 4button.
4	The image selection screen appears.
	Use the four-way controller
				100-0017
	(45) to choose the image for
	the start-up screen.
	Only images suitable for the start-up
	screen are displayed. You can also
	choose one of the 3 pre-installed	MENU Cancel			OK OK
	screens or the Guide Display Start-up
5	Screen already stored in the camera.
	Press the 4button.
	The setting is saved.

254