Using the Power Saving Function

You can save battery power by setting the display to dim automatically when no operation is performed for a fixed time. After the power saving function has been activated, the display returns to the ordinary brightness if any button is pressed.

1 Press the 3button in Q mode.

The [WSetting] menu appears.

When you press the 3button in Amode, press the four-way controller (5) once.

2 Use the four-way controller (23) to select [Power

Saving].

3 Press the four-way controller (5).

4

A pull-down menu appears.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use the four-way controller

 

 

 

 

 

 

 

 

 

Setting

3/4

 

 

 

 

(23) to select the time until

 

 

 

 

 

 

 

 

 

 

Power Saving

2 min.

 

 

 

the camera enters power

 

Quick Zoom

30 sec.

 

 

 

 

 

Auto Power Off

1 min.

 

 

 

saving mode.

 

Guide Display

15 sec.

 

 

 

 

Reset

5 sec.

 

 

 

Choose from [2min.], [1min.], [30sec.],

 

Delete All

Off

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[15sec.], [5sec.] or [Off].

 

MENU Cancel

 

OK OK

 

 

 

 

 

 

5 Press the 4button.

The setting is saved.

•Power Saving does not function in the following situations:

-While taking pictures in the continuous shooting mode

-In the playback mode

-During movie recording

-While the camera is connected to a computer

-When using the AC adapter

-While a menu is being displayed

-In the (Digital Microscope) mode

•When no operation is performed after the camera is turned on, Power Saving is activated only after 15 seconds elapse even if [5sec.] is set.

7 Settings

249