Pentax 16926, 16961 Saving the Settings (Memory)

3 TakingPictures

Saving the Settings (Memory)

The Memory function is for saving the current camera settings when the camera is turned off.

For some camera settings, the Memory function is always set to O(On) (the settings are saved when the camera is turned off), while for others you can choose on or off (to choose whether the settings are saved or not when the camera is turned off). The items which can be set to On or Off in the Memory function are shown in the table below. (Items not listed here are always saved in the selected settings when the camera is turned off.)

If you select O(On), the settings will be saved in the status they were in immediately before the camera was turned off. If you select P(Off), the settings will be reset to the defaults when the camera is turned off. The table below also shows whether the Memory default setting for each item is on or off.

Item	Description	Default	Page
		setting
Face Detection	A Face Detection mode set by using the I	P	p.80
	button.
Flash Mode	The flash mode set with the four-way	O	p.117
	controller (4)
Drive Mode	The drive mode set with the four-way	P	p.103	-
	controller (2)		p.110
Focus Mode	The focus mode set with the four-way	P	p.119
	controller (5)
Zoom Position	The zoom position set with the w/x	P	p.88
	button.
MF Position	The manual focus position set with the four-	P	p.120
	way controller (23)
White Balance	The [White Balance] setting on the [ARec.	P	p.128
	Mode] menu
Sensitivity	The [Sensitivity] setting on the [ARec.	P	p.131
	Mode] menu
EV Compensation	The [EV Compensation] setting on the [A	P	p.133
	Rec. Mode] menu
AE Metering	The [AE Metering] setting on the [ARec.	P	p.130
	Mode] menu
Digital Zoom	The [Digital Zoom] setting on the [ARec.	O	p.90
	Mode] menu
DISPLAY	The display information display mode set	P	p.25
	with the 4/Wbutton
	If a new SD Memory Card is inserted when		⎯
File No.	On has been selected, file numbers are	O
	assigned sequentially.

158