Flash Mode
Wireless Mode
0.0

143

•Set the power switch of the external flash to WIRELESS.

•Two or more AF540FGZ/AF360FGZ externals flashes are required to use high-speed flash sync in Wireless Mode. This function cannot be used in combination with the built-in flash.

•Set the wireless mode of the external flash not directly connected to the camera to SLAVE.

Setting the Channel for the External Flash

First set the channel for the external flash unit.

1Set the channel for the external flash unit.

2Attach the external flash to the camera hot shoe.

3Turn on the camera and the external flash, and press the shutter release button halfway.

The built-in flash is set to the same channel as the external flash unit.

• When set to r mode, the channel currently set for the built-in flash is displayed in the viewfinder for 10 seconds.

•Be sure to set all the flashes to the same channel. Refer to the AF540FGZ or AF360FGZ operating manual for details on how to set the channel on the external flash.

Using the Built-in Flash in Wireless Mode

Set the camera to wireless flash mode when using an external flash in combination with the built-in flash.

1Press the four-way controller (3). The [Flash Mode] screen appears.

2 Use the four-way controller (45) to select rmode.

Press the 4button to return to Capture mode.

OK OK

5

the Using Flash

When Drive Mode is set to ior the lens aperture is not set to the sposition, r appears gray and cannot be selected.