226

Auto Power Off will not work during slideshow playback or USB connection.

Setting the Battery Type

Sets the type of batteries used in the camera. The default setting is [Auto- detect].

1 Select [Select battery] in the [RSet-up 2] menu. 2 Press the four-way controller (5).

The [Select battery] screen appears.

3 Use the four-way controller (23) to select the type of battery.

When set to [Auto-detect], the camera will detect automatically the type of battery used.

 

 

 

1

 

2

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Brightness Level

 

 

 

 

 

Select battery

 

 

 

AUTO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUTO

Auto-detect

 

 

 

 

 

 

Nickel hydride

 

 

 

 

 

Ni-MH

 

 

 

 

 

 

Alkali

 

 

 

 

 

 

 

 

AL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Li

Lithium

 

 

 

 

 

 

 

Reset

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MENU Cancel

 

 

 

OK OK

 

 

 

 

 

 

 

 

 

 

 

 

 

10

Settings Camera

4 Press the 4button.

5 Press the 3button twice.

The screen that was displayed before selecting the menu appears again.

When a type of battery different from that selected in the menu setting is used, the battery level will not be correctly determined. Please set the correct battery type. Usually, there is no problem using automatic detection. However in low temperatures and when using batteries that were stored for long periods of time, set the appropriate battery type so the camera can correctly determine the remaining battery level.