257

Problem

Cause

Remedy

The USB

 

 

connection

The USB

 

with a printer

Set [USB Connection] in the [RSet-up 2]

does not

Connection is set to

menu to [PictBridge]. (p.204)

work

[PC]

 

 

 

properly

 

 

 

 

 

 

The Shake

Turn on the Shake Reduction function.

 

Reduction function

 

(p.122)

 

is off

 

 

 

 

 

 

The Shake

If a lens for which focal length information

 

cannot be acquired is used, set the [Focal

 

Reduction function

 

Length] on the [Input Focal Length] menu.

Shake

is not set properly

(p.124)

Reduction

 

 

 

Shutter speed is too

 

does not

 

low for the Shake

 

work

Turn off the Shake Reduction function and

Reduction function

 

 

to be effective when

use a tripod.

 

panning or shooting

 

 

night scenes, etc.

 

 

The subject is too

Move away from the subject, or turn off the

 

close

Shake Reduction function and use a tripod.

In rare cases, the camera may not operate correctly due to static electricity. This can be remedied by taking the batteries out and putting them back in again. When the mirror remains in the up position, take the batteries out and put them back in again. Then, turn the power on. The mirror will retract. After the procedure is done, if the camera operates correctly, it does not require any repairs.

12

Appendix