Setting the Image Finishing Tone (Custom Image)

You can set the image finishing tone before shooting when the exposure mode is set to e(Program), K(Sensitivity Priority), b(Shutter Priority), c(Aperture Priority) or a(Manual).

Select from the following six modes for [Image Tone]: Bright, Natural, Portrait, Landscape, Vibrant and Monochrome. The default setting is [Bright]. You can adjust the following items for Image Tone.

Saturation*1

Sets the color saturation. (Available settings: –4 to +4)

Hue*1

Sets the color. (Available settings: –4 to +4)

Contrast

Sets the image contrast. (Available settings: –4 to +4)

 

 

Sharpness*2

Sets the sharpness of the image outlines. (Available settings:

 

–4 to +4)

 

Changes the contrast to appear as if a B&W color filter was

Filter Effect*3

used. Sets the filter color. (Available settings: [None],

 

[Green], [Yellow], [Orange], [Red], [Magenta], [Blue], [Cyan],

 

[Infrared Color])

Toning*3

Sets the level for cold tone adjustment (– direction) and warm

 

tone adjustment (+ direction). (Available settings: –4 to +4)

*1 This can be set when any mode other than [Monochrome] is selected.

*2 You can also change the setting to [Fine Sharpness], which makes image outlines even thinner and sharper.

*3 This can be set when [Monochrome] is selected.

1 Press the 4button in the status screen.

The control panel appears.

Press the Mbutton when the status screen is not displayed.

157

6 ShootingSettings

2 Use the four way controller (2345) to select a custom image and press the 4button.

The [Custom Image] screen appears.

After the power is turned on, the last image taken is displayed in the background.

Custom Image

Bright

AWB AUTOISO 400

AF.A

OFF JPEG 10M