Pentax S45 Changing the USB Connection Mode, Select USB Connection on the B Set-up menu

7 Settings

How to call the [B Set-up] menu
MENU	Rec. Mode
	Recorded Pixels	2304
	Quality Level
	White Balance	AWB
Four-way controller	Focusing Area	Multi
	AE Metering
	Sensitivity	Auto
OK button	MENU Exit	OK OK
MENU button

Changing the USB Connection Mode

You can change the USB connection mode depending on whether the USB cable is to be connected to a printer (PictBridge) or a computer.

1	Select [USB Connection] on the [B Set-up] menu.
2	Press the four-way controller (5).
		USB Connection
	The USB connection mode selection screen
	appears.		PC
3	Press the four-way controller		PictBridge
	(23) to change the USB	MENU Exit		OK OK
	connection mode.

For computers: PC

For printers: PictBridge

4 Press the OK button twice.

The camera is ready to be connected to the computer or printer.

Do not connect the camera to your PC while [PictBridge] is selected for the USB connection mode.

Refer to the “PC Connection Manual” for instructions on connecting the camera to a printer or a computer.

Direct Printing Using PictBridge 1p.106

126