Pentax S45 specifications Quick Start, Set the mode dial to R Check the image on the LCD monitor

Quick Start

Taking Still Pictures

2 QuickStart

Shutter release button

Power switch

DISPLAY button

i Delete button

LCD monitor

Mode Dial

Zoom/f/y button

The standard procedure for taking still pictures is described below. The flash fires automatically depending on the light conditions.

1

2

3

Press the power switch.

The camera turns on.

Set the mode dial to R.

Check the image on the LCD monitor.

The focus frame in the middle of the LCD monitor indicates the zone of automatic focusing. You can change the captured area by pressing the Zoom/w/x button.

x: enlarges the subject.

w: enlarges the area captured by the camera.

4

06/10/2005

10:25

Focus frame

Be sure to check the focusing area on the LCD monitor.

4 Press the shutter release button halfway.

The focus frame turns green if the subject is in focus.

5 Press the shutter release button fully.

The image appears on the LCD monitor for 0.5 second (Instant Review) and is recorded on the SD Memory Card or in the built-in memory. The green and red lamps on the upper part of the back of the camera blink alternately while the image is being recorded.

30