188
6 Appendix
Problem | Cause | Remedy | |
The Autofocus | The focus mode is | Set the focus mode lever to =. (p.118) | |
does not work | set to \. |
| |
| AE lock is not |
| |
AE lock | available when set | Set AE lock to setting other than a | |
function does | to a (manual) | (manual) mode or p (bulb) mode. | |
not operate | mode or p (bulb) | ||
| |||
| mode |
| |
|
|
| |
| When flash mode |
| |
| is set to [Auto |
| |
| discharge] or [Auto | Set flash mode to [Manual discharge] or | |
| flash+Redeye | ||
Flash does not | reduct], the flash | [Manl flash+Redeye reduct]. (p.49) | |
discharge | will not discharge |
| |
| when the subject is |
| |
| bright. |
| |
|
|
| |
| Mode dial is set to | Set mode dial to setting other than [Flash | |
| [Flash OFF] | OFF]. (p.47) | |
The power | The camera does |
| |
zoom system |
| ||
not have the power | Use manual zoom. (p.48) | ||
does not | |||
zoom function. |
| ||
function |
| ||
|
| ||
|
|
| |
USB | The transfer mode |
| |
is set to | Set transfer mode to [PC]. (p.84) | ||
connection with | |||
[PictBridge]. |
| ||
computer does |
|
| |
An error occurred | Change the transfer mode to | ||
not work | while sending USB | ||
properly | (p.84) | ||
| data. |
| |
USB | The transfer mode |
| |
connection with |
| ||
printer does not | is set to [PC] or | Set transfer mode to [PictBridge]. (p.84) | |
work properly |
| ||
|
| ||
|
|
|
In rare cases, the camera may not operate correctly due to static electricity. This can be remedied by taking the batteries out and putting them back in again. When the mirror remains in the up position, take the batteries out and put them back in again. Then, turn the power on, and turn the power off while pressing the shutter release button. The mirror will retract. After the procedure is done, if the camera operates correctly, it does not require any repairs.
