LP-Gas Tank Specifications:

 

Weight (filled)

40 lbs.

(18.14 kg)

Capacity

4.5 gallons

 

Diameter (outside)

12 1/8"

(30.8 cm)

Height

18"

(45.7 cm)

Connection

TYPE II Couple Safe

FEED LINE

LP Tank, Hose and Feedline Assembly

LP REGULATOR TO

TANK CONNECTION

TYPE II FILL ADAPTER

TYPE II “COUPLE SAFE”

QUICK COUPLE VALVE

TYPE II LP Connections

NATURAL GAS MODELS

Your PGS gas grill has been designed and produced for outdoor use only! Every gas-burning appliance produces carbon monoxide and should not be allowed to accumulate in confined areas. DO NOT OPERATE YOUR PGS GAS GRILL INSIDE A HOME, GARAGE, RECREATIONAL VEHICLE, BOAT/HOUSE BOAT, OR ANY OTHER ENCLOSED AREA.

When choosing a location for your grill, you must locate it at least 30" away from any combustible material and out of traffic paths. The grill and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psig (3.5kPa).

The grill must be isolated from the gas by closing its valves during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psig (3.5kPa).

DEFINITION OF KEY TERMS

GRILL HEAD: Entire BBQ grill (lid & pit) that can be mounted on a variety of options.

GRILL MOUNT: Supports gas grill head, can be a post mount, pedestal mount (stationary or mobile) or built in frame inserted in a masonry enclosure.

GRILL UPPER CASTING: Top (lid) of gas grill head, made of aluminum and powder coated black.

GRILL LOWER CASTING: Bottom (pit) of gas grill head made of aluminum and powder coated black.

BASE: Stationary or designed to be used with wheels made of aluminum and powder coated black.

RACK: Warming area made of stainless steel and removable.

COOKING GRIDS: Area most used for grilling, with variably spaced grid tines for flexibility.

ROCK GRATES: Solid stainless steel plates with square holes in them for heat convection.

MOON ROK II: The highest quality grill rock for great BBQ flavor and flare control.

COLLAR BOX: Stainless steel box between grill mount and grill head.

IGNITOR MODULE: Battery powered ignition for instant spark.

VALVE: Device used to control amount of gas (and heat) grill produces.

ORIFICES: Openings at end of valve that restrict amount of gas going to BBQ.

VENTURI: Banana shaped tube that allows gas to flow from the valve to the burner.

FEEDLINE: Aluminum gas line from back to grill mount to bottom of valve. Used only on models that include pedestal.

HINGE PINS AND COTTER PINS: Hinge pin goes through lower and upper casting with cotter pins permanently holding.

GASKET: Insulator between pedestal and base.

WATER COLUMN (W.C.): A measurement of gas pressure.

8