YOU WILL NEED THE FOLLOWING TOOLS TO ASSEMBLE YOUR PGS GAS GRILL:
1 | - Mallet or Hammer | 1 | - Med. Phillips Head Screw Driver |
2 | - 6" Adjustable Wrenches | 1 | - Small Roll of Teflon Tape (Natural Gas Only) |
50% Soap and Water Solution | 1 | - Spray bottle or brush |
| Having these additional tools on hand will make assembly easier: | |||
| 1 - 1/2" Socket and Drive |
|
| 1 - 7/16" Socket and Drive |
|
|
|
|
|
| PGS NUTS, BOLTS AND FASTENERS FOR IDENTIFICATION | |||
| (PLEASE NOTE: NOT ALL OPTIONS REQUIRE QTY. BELOW) | |||
REF # | DESCRIPTION | QTY. | PART # | USED FOR: |
1 | 5/16 X 3/4" BOLT | 6 | 101030 | Base to Pedestal |
2 | 5/16” WASHER | 6 | 101260 | Base to Pedestal |
3 | 5/16” LOCK WASHER | 6 | 101280 | Base to Pedestal |
4 | 5/16” NUT | 6 | 101130 | Base to Pedestal |
5 | 1/4 X 20 X | 4 | 101010 | Head to Pedestal Assembly |
6 | CAGE NUT | 4 | 101220 | Head to Pedestal Assembly |
7 | 1/4" WASHER | 4 | 101240 | Head to Pedestal Assembly |
8 | 1/4" LOCK WASHER | 4 | 101270 | Head to Pedestal Assembly |
9 | 3/8 X 16 X 1" BOLT | 2 | 101035 | Side Handle Bolt |
10 | 3/8” STAR WASHER | 2 | 101200 | Side Handle Washer |
11 | HINGE PIN | 2 | 101050 | Upper Casting to Lower Casting |
12 | COTTER PIN | 2 | 101040 | Through Hinge Pin to Secure Top Casting |
13 | 8 x1/2” SHEET METAL SCREW | 2 | 101150 | Collar Box to Pedestal / Control Panel |
14 | TINNERMAN CLIP | 2 | 101210 | Collar Box to Pedestal / Control Panel* |
*NOTE: 2 ADDITIONAL SCREWS/TINNERMAN CLIPS ARE | ||||
15 | FEEDLINE MOUNTING CLIP | 1 | 100340 | To Secure Feedline |
16 | 3 | 101160 | 1 for Feedline Mounting Clip, 2 for Tank Strap | |
17 | 1/4 X 20 X 3/4" BOLT | 4 | 101020 | Side Shelf Assembly |
18 | 1/4" WASHER | 4 | 101240 | Side Shelf Assembly |
19 | 1/4" LOCK WASHER | 4 | 101270 | Side Shelf Assembly |
20 | 1/4" NUT | 4 | 101140 | Side Shelf Assembly |
21 | AXLE CAP | 2 | 100160 | Wheel Hubs |
22 | 1/4 X 20 X 3/4" BOLT | 3 | 101015 | Permanent Post Head to Post Bolt (if purchased 48” |
|
|
|
| Permanent Post) |
23 | 1/4 X 20 NUT w/LOCK WASHER | 3 | 101100 | Nut for above (if purchased 48” Permanent Post) |
|
|
|
|
|
|
|
|
|
|