Use’Manual Recording’ to make a spontaneous recording (for
example,a programme currently being shown).
EIfyou want to start and stop a recording manually, read
thesection: ’Recording without automatic switch-off’.
EIfyou want to start a recording manually but have it
stoppedautomatically, read the section: ’Recording with
automaticswitch-off’.

Recording without automatic switch-off

aInserta cassette.
bUsethe q;Pr= buttonto select the programme
numberyou want to record, for example, ’P01’.
DProgrammenumber ’E1’ is provided for recording
fromexternal sources (via the EXT.1 scartsocket).
cTostart recording, press the RECORDnbuttonon the
remotecontrol or 5onthe TV-VIDEO Combi.
Whenyou are recording, the red recording light at the
frontpanel of the TV-VIDEO Combi will be lit.
dStoprecording with the STOPhbutton.
DIfyou want to switch off the screen while recording,
pressthe STANDBYmbuttononce .
DToswitch the screen back on again, pressthe
q;Pr= button.
DDuringa recording you can only watch the current
programme.

Recording with automatic switch-off

(OTR one-touch-recording)

aPuta cassette in the machine.
bUsethe q;Pr= buttonto select the programme
numberyou want to record.
cPressthe RECORDnbuttonon the remote control.
Whenyou are recording, the red recording light at the
frontpanel of the TV-VIDEO Combi will be lit.
dPressthe RECORDnbuttonagain and again until the
displayon the TV-VIDEO Combi shows the desired end
timeor length of the recording.
DTocancel this information, press the CLEAR(CL)
button.
eConfirmwith the OK button.
fToend, press the MENUbutton.

Protecting your recordings

Sothat you don’t accidentally delete animportant recording,
removethe special tab on the narrow side of the cassette with
ascrewdriver or slide the special tab to the left. Later, if you
nolonger want to protect your recording, you can seal the gap
againwith sticky tape or slide the special tab to the right.

Auto-assembling

Youcan use the auto-assembling function to join individual
recordingswithout any major picturedisturbance between
them.
aWhilethe cassette is playing, search for the correct
positionon the tape.
bStopthe cassette by pressing the STOPhbutton.
’Pause’will appear on the TV screen.
cNowstart recording as usual by pressing the
RECORDnbutton on the remote control.
6. MANUAL RECORDING
15