Front of the set
8Powerswitch : To switch off the set
Beware:If you switch the set off with the power switch 8,TIMER-recordings are not possible!
mStandby: To switch off, interrupt a function, interrupt a programmed recording (TIMER)
PpProgrammenumber : To select programme number up or down
Sp Volume:To regulate the volume
ON/OFF Radio:To switch on the radio and to switch between radio- and TV-mode
HRewind: During STOP and STANDBY: rewind, during PLAYBACK: reverse scanning
IForwardwind: During STOP and STANDBY: forward wind, during PLAYBACK: forward scanning
5Record:To record the programme selected
GPlayback: To play a recorded cassette
?Pause/Stop,eject cassette: To stop the tape and during STOP eject the cassette
AUDIO Audioinput socket left/right stereo
VIDEO Videoinput socket : To connect a camcorder or videogames
wHeadphonessocket: To connect headphones
Back of the set
2Aerialinput socket: To connect the aerial cable
EXT.1 Scartsocket: To connect a satellite receiver, decoder, video recorder, etc.
The display at the front of the machine
Inthe display the time, the radio frequency or the radio programme number will be shown.
Also,these lights may light up in the display:
nRecordinglight: Will light up when a recording is being made
ALARMnRadio alarm: Will light up when the radio alarm is activated
nBUZZER Buzzeralarm: Will light up when the buzzer alarm is activated
kTimerlight: Will light up when a Timer recording has been programmed; will blink when a Timer
recordingcannot start
&