E’To record press STANDBY’will appear on
thescreen. If you have programmed a recording that
shouldstart within the next few minutes, confirm with the
STANDBYmbutton. If you have programmed a recording
thatwill start at some later point in time, confirm with the
OK button.
DAprogrammed recording can only start,when the
machineis switched to standby.
DIfyou entered the wrong date for a daily/weekly
recording,your TV-VIDEO Combi will correct it
automatically.
gIfyou have confirmed with the OK button,use the
TIMERkbutton to exit the menu.
DTheprogramming information has been stored in a
TIMERblock.
hMakesure that the cassette you have put in can be
recordedon.
How to check or change a TIMER
aPressthe TIMERkbutton on the remote control.
bSelectthe line ’TIMER PROGRAMMING’ with the
PrB or APqbuttonand confirm with the
SqC button.
cSelectthe TIMER you want to check or change with the
PrB or APqbuttonand confirm with the OK
button.
dSelectthe entry field with the DSr or SqC
button.
eChangeany information with the PrB or APq
buttonor with the 0-9 buttons.
DUnder’LP’, use the PrB or APqbutton to
selectthe recording speed ’SP´ or ’LP´.
fConfirmwith the OK button.
gToend, press the TIMERkbutton.
hMakesure that the cassette you have put in can be
recordedon.
How to clear a TIMER
aPressthe TIMERkbutton on the remote control.
bSelectthe line ’Timer programming’ with the
PrB or APqbuttonand confirm with the
SqC button.
cSelectthe TIMER you want to clear with the PrB or
APqbutton.
dPressthe CLEAR button.
eSwitchoff with the TIMERkbutton.
19