Automatic search for a tape position(index search)
Atthe start of each recording, the TV-VIDEO Combi will write
anindex code on the tape.
aPressthe INDEXEbutton. Press the Ibutton to
selectthe next code mark or the Hbutton for the
previouscode mark.
bWhenthe TV-VIDEO Combi finds the code mark, it will
automaticallyswitch to play.
Picture interference
Whenthe picture quality is poor when you play a cassette,
pleasefollow these instructions.
Tracking during playback
aDuringplayback, press the MENU button.
bSelectthe line ’Tape’ with the PrB or APq
buttonand confirm with the SqC button.
cSelectthe line ’Tracking’ with the PrB or
APqbutton.
dHoldthe DSr or SqC button until the playback
qualityis at its best.
eConfirmwith the OK button.
fToend, press the MENU button.This setting will remain
untilyou remove the cassette.
Tracking during still picture
Ifthe still picture vibrates vertically, you can improve the still
pictureas follows:
aDuringstill picture, press the MENU button.
bSelectthe line ’Tape’ with the PrB button or
APqandconfirm with the SqC button.
cSelectthe line ’Jitter’ with the PrB or APq
button.
dHoldthe DSr or SqC button until the picture
qualityis at its best.
eConfirmwith the OK button.
fToend, press the MENU button.
DPleasenote, however, that interference may still
occurwith poor quality cassettes.
Cleaning the video heads
Ifhorizontal lines appear on the screen when you play a
cassette,you should clean the video heads.
aDuringplayback, press the MENU button.
bSelectthe line ’Tape’ with the PrB or APq
buttonand confirm with the SqC button.
cSelectthe line ’Cleaning’ with the PrB or
APqbutton.
dPressthe OK button. ’CLEANING’ appears on the
screen.
eWaita few seconds, until the message disappears and
thenpress the MENU button.
15