Initial installation

aOpenup the battery compartment of yourremote control
andplace the batteries in it as shown in the picture.
bClosethe battery compartment.
cSelectthe language for the on-screen display (OSD) with
the PrB or APqbutton.
dConfirmwith the OK button.
eSelectthe country of your residence with the PrB or
APqbutton.
Ifthis country does not show up, select ’OTHER’.
fConfirmwith the OK button.
gIfthe aerial (antenna) has been connected to the
TV-VIDEOCombi and the radio aerial has been adjusted,
pressthe OK button.
’AutomaticTV channel search’ starts.This picture will
appearon the screen:
Searching ...
CHANNELS FOUND: 06
Radio channels stored: 7
//////,,,,,,,,,,,,,,,,,,,,,
Waituntil all TV channels have been found. This can take
severalminutes.
E’Time’,’Year’, ’Month’ and ’Date’ will appear on
theTV screen.
Autostore ready
CHANNELS FOUND: 09
Radio channels stored: 2
Time 15:36
Year 1999
Month 01
Date 01
Exit:
press MENU
hCheckif the time in line ’Time’ is correct. If required,
changethe time with the number buttons 0-9 onyour
remotecontrol.
iCheck’Year’, ’Month’ and ’Date’ in thesame way.
Youcan switch between lines with PrB or APq
button.Confirm the new information with the OK button.
Theinitial installation is now complete.
DIfyou have connected a decoder, you must install it
asdescribed in the next section.
DIfyou have connected a satellite receiver, please
readthe section ’satellite receiver’.
2. INSTALLING YOUR TV-VIDEO COMBI
5