41
06
07
08
09
06
07
08
09
07
08
09
1
4
2
PIP CC
PROG. LIST CLOCK
A/CH
TV/VCRSLEEP SOURCE FORMAT
AUTO ACTIVE AUTO
SOUND CONTROL PICTURE
MENU SOUND
SURR.
VOL CH
MUTE
PC TV HD
RADIO
123
456
789
0
STATUS/EXIT SURF
TV
DVD
ACC
POSITION
3
3
Your TV remote can be set to work various
external devices such as VCRs, Cable
Boxes, Satellite Receivers, DBS, DVD, etc. by
what is called the search method of remote
control programming.
If the “Remote Code” number method shown
on the previous page did not set your remote
to work your external device, then follow the
easy steps listed below.
Please read steps 1-4 before beginning.
1Press the POWER button on the
device your are attempting to program
to turn it ON.
2Place the TV/DVD/ACC Mode
Switch in the proper position.
3Press the • RECORD and the AUTO
SOUND buttons simultaneously and
hold them down. The remote will con-
tinue to send programming codes, one
ever 1.5 seconds.
4The device will begin to change chan-
nels after the remote identifies the cor-
rect code. When the channels start to
change release the • RECORD and
AUTOSOUND buttons. The remote
should be ready to operate the device.
REMOTE CONTROL USE WITH ACCESSORY DEVICES - SEARCH METHOD
This method can take several minutes to per-
form.
Don’t let the device scan up more than five
channels. If you do the remote may pass up
the right code and another search cycle will
have to be repeated.
If no channel change happens within two
minutes, repeat steps 1-4. Should a channel
change still not occur, the remote will not
work the desired device.
NOTE: Setting up the remote is for use with
external accessory devices only and not for use
with other television brands.
HELPFUL HINT
Cable Converter
Satellite Receiver
VCR