Philips 17PF9945/58 warranty Remote Control USE with Accessory Devices Code Entry Method

REMOTE CONTROL USE WITH ACCESSORY DEVICES - CODE ENTRY METHOD

Now that you have looked up the three- digit Remote Code Number for your

brand of device, you are ready to follow the four simple steps below.

Please read through steps 1-4 before begin- ning.

1 Place the TV/DVD/ACC Mode

Switch in the proper position.

2 Press the • RECORD button on the remote control and release.

3 Press the AUTO SOUND button on the remote within 30 seconds, then release.

4 Enter the FOUR-DIGIT REMOTE CODE NUMBER (page 42-44) for your desired device. The remote is now ready to send commands to the unit.

5 Point the remote at the Device. Press the POWER button on the remote to turn the unit ON. If this works you are finished. If it does not work the first time, repeat the steps using a different remote code number.

HELPFUL HINT

After a second try and the remote does not operate your device, see if there is another four-digit code number (pages 42-44) listed for your device and repeat the steps above using the new number.

If after repeated attempts the code number method does not work you device, try the SEARCH METHOD on the next page.

NOTE: Setting up the remote is for use with external accessory devices only and not for use with other television brands.

VCR

Satellite Receiver

or DBS, DVD

Cable Converter

2

1

3

	PIP	POSITION	CC
TV	PROG. LIST	CLOCK
DVD
SLEEP	TV/VCR	SOURCE	FORMAT
ACC
	A/CH
AUTO	ACTIVE		AUTO
SOUND	CONTROL		PICTURE
			SURR.
MENU			SOUND

MUTE

VOL CH

RADIO

PC TV HD

1 2 3

4 5 6

7 8 9

STATUS/EXITSURF

0

5

4

40