29510_AVR745_Engelsk 30/10/06 9:31 Side 12
Zone II Remote Control Functions
A
E
B
C
J
F
I
H
G
J
APower Off B AVR Selector
C AM/FM Tuner Select D Input Selectors E OSD Button
F Navigation Controls G Numeric Keys H Disc Skip
I Volume Up/Down J Blank Buttons K Mute
L Clear Button M Direct Button
K
J
D
Q
P
O
N
M
L
NMemory Button O Tuner Mode Button P Transport Controls Q Set Button
The Bridge 
/DMP Selector
NOTE: The Zone II remote may be used in either the same room where the AVR is located, or it may be used in a separate room with an option- al infrared sensor that is connected to the AVR’s Multi IR input jack f. When it is used in the same room as the AVR, it will control the func-
The Zone II remote may be used in either the same room where the AVR is located, or it may be used in a separate room with an optional infrared sensor that is connected to the AVR’s Multi IR input jack .
We strongly recommend that the ZR 10 remote be used for the initial configuration and setup process for the AVR 745.
APower Off: When used in the room where the AVR is located, press this button to place the unit in Standby. When it is used in a remote room with a sensor that is connected to the
Multi IR jack , this button turns the Multi- Room system off.
BAVR Selector: Press this button to turn on the AVR. The input in use when the unit was last on will be selected.
CAM/FM Tuner Select: Press this button to select the Tuner as the input to the Multiroom system. Press it again to change between the AM and FM bands.
DInput Selectors: When the AVR is off, press one of these buttons to turn the unit on and to select a specific input. When the unit is already in use, pressing one of these buttons will change the input.
EOSD Button: Press this button to activate the On Screen Display (OSD) system used to set up or adjust the AVR’s parameters.
FNavigation Controls: Depending on the menu or function in use, pressing these buttons will navigate through menus, scroll through option lists or configuration choices, or move the cursor position. Press the left, right, up or down button, as appropriate to the adjustment being made.
tions of the AVR or any compatible
Harman Kardon products in that room. When it is used in a separate room via a sensor connect- ed to the Multi IR Jack f, the buttons for power, input source, volume and mute will con- trol the source and volume for the second zone, as connected to the Multi Out Jacks •. (See page 55 for complete information on using the Multiroom system.)
12ZONE II REMOTE CONTROL FUNCTIONS
