29510_AVR745_Engelsk 30/10/06 9:31 Side 17
Installation and Connections
Figure 1: SCART/Cinch-Adapter for playback; signal flow:
SCART → Cinch
Figure 2: SCART/Cinch-Adapter for record and playback; signal flow:
SCART ↔ Cinch
Figure 3: Cinch/SCART-Adapter for playback; signal flow:
Cinch → SCART
Figure 4:
SCART/S-Video Adapter
for playback;
signal flow:
SCART → Cinch
Blackck
Yellow
Red
Black
Red
Blue1
Yellowl w
Greenn 1
White
Black
Yellow
Red
Redot
BlackSchwarz
Important Note for the Use of
SCART-Cinch Adapters:
When video sources are connected to the TV directly with a SCART cable, specific control signals apart from Audio/Video signals will be fed to the TV. These specific signals are: With all video sources, the signal for automatic input selection that switches the TV automatically to the appropriate input as soon as the video source is started. And with DVD players, the signals automatically turning the TV to 4:3/16:9 format (with 16:9 TVs or with 4:3 TVs with selectable 16:9 format) and turning the RGB video decoder of the TV on or off, depending on the DVD player´s setting. With any adapter cable, these control signals will be lost and the appropriate setting of the TV must be made manually.
Note for RGB signal with SCART:
If you use a unit providing RGB signals on a SCART output (as e.g. most DVD players do) and you want to use that RGB signal, this SCART output must be connected directly to your TV. Although the AVR can switch
ENGLISH
Figure 5:
for record and playback;
signal flow:
SCART ↔ Cinch
Figure 6:
for playback;
signal flow:
Cinch → SCART
BlackSchwarz
RedRot
BlueBlau1
YellowGe b
Rot
Red
SchwarzBlack
1Also other colours possible, e.g. brown and grey.
with SCART) that cannot be switched and pro- vided by the AVR.
RGB signals can be pathed through the AVR only when no separate sync signal is needed (see last ”Video Connection Note” on page 16).
INSTALLATION AND CONNECTIONS 17
