Philips 210, DTR user manual Timer, Adding programme to timer list, Editing timer list, English

Timer

By means of the timer setting, you can switch your receiver on and off at a specific time, for instance, in order to allow for the recording with a video-tape recorder. The device then automatically switches on in the standby mode. If the device is already switched on, the device automatically switches to the selected programme.

Note: Remember to program your video-tape recorder to the respective time.

Adding programme to timer list

The timer function is included into the timer list via the EPG, see previous paragraph.

1Open the

EPG and highlight the desired programme.

2Press the TIMER/REC button.

3Press the OK button.

The window is closed and the selected programme is stored in the timer list.

Editing timer list

During the normal programme replay, press the TIMER/ REC button to open the timer list.

Deleting (a) programme(s)

1Select the desired programme.

2Press the respective colour button: red: the selected programme is deleted yellow: all programmes are deleted.

3Press the OK button to acknowledge the following request.

Timer editing

1Select the desired programme and press the OK button.

English

2Alter the displayed settings by using the arrow and numerical buttons. In doing so, you can:

-change the date (month and day)

-the time (starting time and duration)

-the cycle (interesting for series and regularly recurring programmes)

3Then highlight OK behind adopt, and press the OK but- ton.

Switching off current timer functions

Note: During a timer programme, only few buttons

can be activated: I-II,APP, OPT, as well as the volume buttons + and -,as well as the mute button.

To switch off the timer function:

1Press on / off.

A programme message is displayed.

2Press the OK button.

OPERATION 15