Philips 22PFL3805H/12 Access decoder channel, Start a TV demo, Reset the TV to factory settings

Access decoder channel

You can map channels provided through a decoder or descrambler to yourTV channel selection. In this way, you can select these channels by using the RC of yourTV.The decoder or a descrambler must be connected to EXT1 (SCART).

Set decoder channel

Map channels from a decoder or descrambler.

1Press .

2Select [Setup] > [Installation] > [Decoder].

3Press to enter [Decoder] menu.

4Press to select [Channel], then press to enter.

5Select one channel to map to the decoder / descrambler channel and press OK to confirm.

6Select [Status], then press to enter.

7Select [EXT 1] (SCART) the connector used by the decoder / descrambler.

8Press OK.

9Press to exit.

Note

•Select [None] if you do not want to map to the decoder / descrambler channel.

Start a TV demo

You can use demonstrations to better	English
understand the features of your TV. Some
demos are not available on certain models.
Available demos are displayed in the menu list.

1Press DEMO on the remote control.

2 Pressto select a demo and press OK to view it.

3Press DEMO to exit.

Reset the TV to factory settings

You can restore the default picture and sound settings of yourTV.The channel installation settings remain the same.

1 Press.

2Select [Setup] > [Installation] > [Factory settings].

3 Pressto enter [Factory settings].

4Select [Reset] to start resetting.

5Press OK.

6 Pressto exit.

EN 31