Philips 22PFL3805H/12 user manual Use Philips EasyLink

Use Philips EasyLink

Your TV supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control.

Note

•The EasyLink-compliant device must be switched on and selected as the source.

•Philips does not guarantee 100% interoperability with all HDMI CEC devices.

EasyLink features

One-touch play

When you connect your TV to devices that support one-touch play, you can control your TV and the devices with one remote control. One-touch standby

When you connect your TV to devices that support standby, you can use your TV remote control to put your TV and all connected HDMI devices in standby mode.

System audio control

When you connect your TV to HDMI CEC compliant devices, your TV can switch automatically to play audio from the connected device.

To use one-touch audio, you must map the audio input from the connected device to your TV.

You can use the remote control from the connected device to adjust the volume.

Enable or disable EasyLink

Note

•Do not enable Philips EasyLink if you do not intend to use it.

1Press .

2Press to select [Setup] > [Installation] > [Preferences] > [EasyLink].

3Select [On] or [Off].

Use one-touch play

1After enabling EasyLink, press play on your device.

»TheTV automatically switches to the correct source.

Use one-touch standby

1Press (Standby-On) on the TV’s or device’s remote control.

»TheTV and all connected HDMI devices switch to standby.

Set TV speakers to EasyLink mode

When you play content from an EasyLink compliant home theater, the TV speakers are automatically muted.

1Enable one-touch play and one-touch standby between your Easylink compliant devices by following the instructions

in the previous section (see ‘Enable or disable EasyLink’ on page 39).

2Press .

3 Press to select [Setup] > [Sound]

>[TV speakers] > [Auto EasyLink]. » TheTV speakers are turned off

automatically when content from an Easylink compliant system is detected.

4 Press to select [Setup] > [Sound]

>[TV speakers] > [On] to disable system audio control and enable the TV speakers.

Note

•To mute the TV speakers, select [TV speakers] > [Off].

English

EN 39