2. Consumable Parts and AC Adapter
When consumable parts have run out, use those specified in the table below. Make sure that the AC adapter specified in the table is used.
Use of consumable parts or AC adapter which are not specified in the table may result in damage to the printer, fire or electric shock.
(1)Roll paper specification
Thermal paper Thickness: 65~85 ∝m
Width: 79.5±0.5 mm (57.5±0.5 mm when the optional paper roller
holder is used)
Outer roll diameter: ø90 mm or less
Take up paper roll width: 80 | +0.5 | +0.5 | mm when the optional |
paper roller holder is used) |
|
|
|
Core outer/inner diameter |
|
|
|
Paper thickness | Core outer |
| Core inner |
65~85 ∝m | ø18±1 mm |
| ø12±1 mm |
Printed surface: Outer edge of roll
Tail end handling: Do not use paste or glue to secure the roll paper or its core.
Do not fold the tail end of the paper.
(2) Recommended paper
Mitsubishi Paper Mills Limited
P220AG (normal type paper), 65 ∝m (thickness)
HP220A (high image stability paper), 65 ∝m (thickness)
P220AB (normal type paper, card ticket), 85 ∝m (thickness)
Oji Paper Co., Ltd.
PD150R (normal type paper), 75 ∝m (thickness)
PD160R (high image stability paper), 65/75 ∝m (thickness)
Nippon Paper Industries
Depending on the type and thickness of the paper, it may be necessary to change the settings for printing darkness. To change the darkness settings, use the printing darkness settings command <ESC><RS> ‘d’ n. Refer to the separate programmer’s manual for details.
ENGLISH
– 4 –
