Star Micronics TSP600 user manual A-2. Auto Cutter Specifications, A-3. Interface, A-5. Option

A-2. Auto Cutter Specifications

(1) Cutting frequency	Max. 20 cuts per minute
(2) Thickness of paper	65~85 µ m

A-3. Interface

RS232C serial interface or Two-way parallel interface (IEEE1284)

A-4. Electrical Characteristics

(1) Input Voltage			DC 24V±10%
(2) Current Consumption			Operating: Approx. 1.3 A (at ASCII printing)
			Peak:	Approx. 8 A (at print duty 100%,
				for 10 seconds or less)
			Stand-by:	Approx. 0.05 A
(3) Power Connector
	Pin No.	Function		1	3
	1	DC24V
	2	Signal GND			2
	3	N.C.
	Shell	Frame ground		<Viewed from Connector Surface>

Important!

•When using a printer power supply other than the optional AC adaptor (PS60-24A), be sure that the following cautions are observed.

•Use a power supply of DC 24 V ±10% and more than 2.0 A (5.0 A Load 10 sec. Min) with SELV output approved by IEC60950.

•Be careful about installing the printer in an area where there is noise. Take the appropriate measures to protect against electrostatic AC line noise, etc.

A-5. Option

(1)Wall Mount Set (WB-T600)

(2)Vertical Stand Set (VS-T600)

(3)USB Interface Board Unit (IFBD-HU04)

(4)Parallel Interface Board Unit (IFBD-HC04)

(5)25 Pin RS-232C Interface Board Unit (IFBD-HD04)

(6)9 Pin RS-232C Interface Board Unit (IFBD-HN04)

APPENDIX

– 96 –