Star Micronics TSP600 user manual Sub 9 Pin option

Pin No.		Signal name		Direction			Function
25 Pin	9 Pin
							Printer status	DIP SW 1-6
								OFF	ON
						1.	During the period from when the
							power is turned on (including reset-	BUSY	BUSY
							ting using the interface) to when the
							printer is ready to receive data.
						2.	During the self printing.	BUSY	BUSY
						3.	When the cover is open.	-	BUSY
						4.	When the printer stops printing due to	-	BUSY
							a paper-end.
						5.	During macro executing standby	-	BUSY
							status.
						6.	When an error has occurred.	-	BUSY
						7.	When the receive buffer becomes	BUSY	BUSY
							full.
					2) X-On/X-Off Communication Mode
						Always space, except during following conditions:
						• Period between reset and communication enabled
						• During self printing
										APPENDIX
21~24			N/C		• DIP Switch 3-8=ON
					Not used
25			INIT	IN	• DIP Switch 3-8=OFF
					Status of this signal is not checked.
					This signal used for external reset. Printer is reset whenever signal
					is in space state with pulse width of 1mS or more.

13	1
	D-sub 25 Pin
25	14

51

96

D-sub 9 Pin (option)

– 106 –