General Product Specification
•All major plastic parts (bezel, back cover) need to be molded from same resin.
•Plastic resin type selection should be referred to
5.12Texture/Glossing of housing
•The texture area and texture no should follow Philips
•The exterior surfaces shall have a uniform texture.
•Philips must approve the mold texturing.
•Detail document for texture refer to
•< = 20 gloss units
5.13Tilt and swivel base
• Tilt angle | : |
| +21.5 °+ 1.5/- 1.5 ° (backward) |
•Swivel angle : >86?
•High Adjustment : total 130mm
•Portrait Display : 0?~90? ( CW direction )
5.14Kensington Lock
•Must meet Kensington_slot.spec
•MMD request metal plate in Kensington hole.
5.15Label
•Regulatory label / Carton label should follow Philips requirement.
•China RoHS label
•Detail document refer to Philips Engineering Reference Book.
5.16Product dimension / Weight ( Refer to Philips approved SHT 191/SHT560 )
•Unit dimension : 667@8987A,,2++
•Packed unit dimension: A69B8C2B,AA++
•Net weight : 7,D&