Philips 240PW9EB/75, 240PW9ES /00, 240PW9EB/27, 240PW9EB/00 manual General Product Specification

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

General Product Specification￿

non-interlaced mode (1920 x 1200@75Hz) (1920 x 1200@60Hz), signal sources must have 75 ohm output impedance.

(2) Luminance setting : controls to be set to 300 nits (typical) 250 nits (typical) with full screen 100 % duty cycle white signal

(3)Warm up: more than 30 minutes after power on with signal supplied.

(4)Ambient light: 400 -- 600 lux.

(5)Ambient temperature: 20 ± 5 °C

4.2Brightness

To follow Panel specification.

4.3Image size

Actual display size 6￿7￿8￿￿￿9,8￿mm

4.4Brightness uniformity

Set contrast at 100% and turn the brightness at 100%.

Apply the Fig 1, it should comply with the following formula:

B_min

X 100% >75%

B_max

Where B_max =Maximum brightness

B_min = Minimum brightness

4.5Check Cross talk (S)

Apply Pattern 2. Set contrast and brightness at 100 %. Measure YA. Then output Pattern 3 and measure YB.

the cross talk value :

ABS ( YA - YB )

⎯⎯⎯⎯⎯⎯⎯⎯⎯ X 100% < 1.5 %

YA

4.6White color adjustment

There are three factory preset white color 9300K, 6500K, sRGB

￿