29
English
EN
[Low power standby (Green / Fast)]
Denes the power mode when TV enters to
standby by pressing remote control power button
or TV local power button.
[Fast]: • When set, the TV will enter semi-
standby mode to achieve fast powering
up.
[Green]: • When set, the TV will enter
low standby power mode to achieve
minimum power consumption.
[Power on]
The power on function allows the TV to enter a
specic mode ([On], [Standby], or [Last status])
of operation after the mains power is activated.
[On]: • When set, the TV will always turn
on after the mains power is activated.
[Standby]: • When set, the TV will always
turn to standby after the mains power is
activated.
[Last status]:• When set, the TV will
always turn to the last status (either On
or Standby) whenever the mains power
is activated.
[Smart power]
Adjusts the picture backlight to achieve the
following power saving mode.
[Off]: • Smart power is disabled. ( Vivid
mode is applied).
[Low]: • The picture backlight is at low
power saving mode. (Movie mode is
applied).
[Medium]: • The picture backlight is at
medium power saving mode. (Standard
mode is applied).
[High]: • The picture backlight is at high
power savings (Energy saving mode is
applied).
[Display message]
[Off]: • Disables the display of the
welcome message.
[On]: • Enables the display of the welcome
message for a pre-dened time after the
TV turns on from standby or off.
Note
•Selects [Welcome message] ≥ [Message
time-out] to set the period of time to
display the welcome message.
[Set ID]
(Only available in [Signage] mode). This function
allows installer to designate a serial ID number for
each TV. Through the ID number, the installer can
control each TV by using RS232-device-chaining.

Switch on volume

When the guest switches the TV on, it will play at
the specied volume level.
[Last status]• : If [On] is selected, the TV
will be automatically switched to the
last volume status whenever the mains
power is turned on. (The volume level
can not exceed the [Maximum volume]
level).
[Userdened]• : (Only appears when you
select [Last status] ≥ [Off]. )The guest
can adjust his/her preferred switch on
volume level.

Switch on channel

When the guest switches the TV on, it will play at
the specied channel.
[Last status]• : If [On] is selected, the TV
will be automatically switched to the
last channel status whenever the mains
power is turned on.
[Userdened]• : (Only appears when you
select [Last status] ≥ [Off]). The guest
can choose his/her preferred switch on
channel.