33
English
EN
[Disable auto updating]
[Software]: • Disables automatic TV
software update via OAD (On the air
software download).
[Channel]: • Disables automatic channel
installation when new channels are
detected.
[Both]: • Disables automatic update
of the TV software and the channel
installation.
[Off]: • Enables automatic update of
the TV software and the channel
installation.
[Skip scrambled signals]
[Off]: • Allows scrambled channels in
the channel list.
[On]: • Skips the scrambled channels in
the channel list.
[Smart RC]
[Off]: • PayTV channels are accessible
via the Guest remote control.
[On]: • PayTV channels are only
accessible via the Smoovie remote
control.
[Multi remote control]
Guest remote control supports up to four
televisions operating in one room without
interference from each other’s remote controls.
Each TV and the Guest remote control can be
set to match each others.
1 Enter [Multi remote control] and
designate one colour (Blue / Green /
Yellow / Red) to the TV. Select [Off] to
disable [Multi remote control] function.
2 Set the Guest remote control to the
corresponding colour by pressing
MENU and one of the colour button
simultaneously for more than 4 seconds.
3 The Guest remote control can operate
the TV with the corresponding colour.
Note
EXAMPLE: • Press MENU and Red button
simultaneously on the Guest remote
control for more than 4 seconds to
operate the TV with [Red] colour selected
in [Multi remote control] menu.
Guest remote control will be set to default •
Blue colour after replacing batteries.

Add current channel to PayTV ring:

This function allows you to customized PayTV
channel list.
1 Switch to the channel you prefer to add into
the PayTV ring.
2 Enter [Add current channel to PayTV ring]
menu.
3 Select one of the PayTV ring below to mark
current channel to:
[R1]: • If [Smart RC] is [On], R1 channels
marked with [X] are only accessible via
the Smoovie remote control 1.
[R2]: • If [Smart RC] is [On], R2 channels
marked with [X] are only accessible via
the Smoovie remote control 2.
4 Enter [R0] (all available channels) to unmark
the channels you have marked in [R1] and
[R2] to prevent users from watching full
PayTV channels via Guest remote control.
Note
All non-PayTV channels are listed in •[R0].