Library Operation | Securing the Front Door (Without Power) |
WARNING. Possible injury to finger: Make sure that your finger is completely to the left in the next step so that it will not be pinched when the door locking lever extends as shown in the lower picture.
Figure 3-3. Door Locking Lever Extended
3.While using one hand to move the robotics park lever to the left, use your other hand to unlock the door with the key.
Securing the Front Door (Without Power)
To secure the front door when no tape library power exists:
1.Remove the robotic facade from the top of the tape library by gently pulling the facade from side to side to pull the ball studs away from the clips. You might have to use a screwdriver to gently pry it off.
Caution. Possible component damage: Note the door locking lever protruding from the top of the door. Do not let it hit the robotics park lever when you close the door.
2.While using one hand to move the robotics park lever to the left, use your other hand to close the door.
SL500 (M852x) Tape Library Installation and User’s
