Controls and Indicators | Keypad |
Table
Buttons/Indicators | Description | |
Service Robot | Indicator | |
| LED is lit when the robot is not functioning. Replace | |
| the robotics unit. | |
Library Active | Indicator | |
| • | LED is normally solid green. |
| • | LED turns off when the tape library experiences |
|
| a failure. If it never turns on, an initialization or |
|
| power failure has occurred. |
Service Required | Indicator | |
| • | LED is normally solid green. |
| • | LED is lit when the tape library experiences a |
|
| |
Open Door | Indicator | |
| • | LED flashes amber when the Open Door button |
| • | is pressed. |
| LED is solid amber when the robot is parked in | |
| • | the robotics unit. |
| LED flashes during initialization and audit. | |
| • | LED is not lit when the library is ready for |
|
| customer use. |
| Button | |
| When pressed: | |
| 1. | Software allows the current job to complete. This |
|
| could take awhile. |
| 2. | Software retracts the robot into the robotics unit |
|
| so that it will not be damaged when you open |
|
| the door with the key. |
Open CAP | Indicator | |
| • | LED is amber when any CAP doors are open |
| • | LED is not lit when all CAP doors are shut |
| • | LED flashes during audit |
Button
Button is used to tell the robot to open the CAP doors.
SL500 (M852x) Tape Library Installation and User’s