Cartridge Information

Valid Labels

Perform these steps before applying the label into the recessed area on the cartridge:

1.Make sure the cartridge has been at room temperature for at least 24 hours.

2.Clean the surface where the labels will be placed using a cleaning solution made for this purpose.

3.Locate the type of label that you require.

4.Hold the cartridge so that the write-protect switch is toward you.

5.Attach the label to the cartridge as shown in Figure 4-3.

Figure 4-3. Ultrium Cartridge Label

1. Volume number label

SL500 (M852x) Tape Library Installation and User’s Guide—541531-006

4-5