2 Controls and Indicators
This section includes:
Power Switch
When the switch is in position 1 the tape library and tape drives are powered on. When the switch is in position 0 the tape library and tape drives are powered off.
Note. Earlier built tape libraries had power supplies that had individual power switches. Later tape libraries have one power switch that controls all power supplies in the rack.
Keypad
The keypad is used to open the door, open the CAP, and notify the user if service is required.
1.The Door Open button opens the tape library door. All doors function as one door and can not be opened individually.
2.The CAP Open button opens all CAP doors.
3.The Library Active LED, if on, indicates the tape library is functioning properly. If the Library Active LED is flashing, call your service representative.
4.If the Service Robot LED is on and flashing, call your service representative.
5.If the Service Required LED is on and flashing, call your service representative.
SL500 (M852x) Tape Library Installation and User’s