HP SL500 (M852x) manual To add the data path SCF, issue this command

Configuring the M8521 Tape Library for the Integrity	Adding the Control Path and Data Path
NonStop NS-Series Server

To add the data path:

Note. WWN (portname) for each port is labeled on the back of each tape drive.

1.In SCF, issue this command:

SCF> ADD TAPE $tape, SENDTO STORAGE, LOCATION (group, module, slot), SAC sac-id, PORTNAME 64-bit-portname, LUN lun-id

Example:

SCF> ADD TAPE $M8504, SENDTO STORAGE, LOCATION (110,2,2), SAC 2, LUN 0, PORT 50060B00002E69CD

Note. The LUN (logical unit number) for all Fibre Channel tape storage devices directly attached to the NonStop NS-series server is 0.

2.To start the tape drive on the server, issue this command in SCF:

SCF> START TAPE $tape Example:

SCF> START TAPE $M8504

For complete details about the ADD and STATUS commands, including command syntax, see the SCF Reference Manual for the Storage Subsystem.

SL500 (M852x) Tape Library Installation and User’s Guide—541531-006

6-2