Library Operation | Powering On the Tape Library |
Powering On the Tape Library
To power on the library:
1.Close and lock the front door if the door is open.
2.Press the power switch (on the top right corner of the back of the library) to the ON
(1) position.
Powering Off the Tape Library
Caution. If you power off the tape library without performing the following procedure, you risk possible equipment or cartridge damage or loss of data.
1.Make sure that all jobs have completed processing.
2.Make sure the tape library and tape drives are not in use.
3.Move the power on/off switch to the OFF position (0).
SL500 (M852x) Tape Library Installation and User’s