Use of the remote control
Note: For most buttons pressing a button once will activate the function. Pressing a second time will
When a button enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list. The list will be removed automatically after 6 seconds or press ok to remove immediately.
power
Press to turn on/off the TV from or to standby mode.
The TV is never powered off completely unless it is physically unplugged.
demo Demo menu on/off
See p. 8.
clock on/off
Time display (for max. 10 minutes)
Color buttons
When functions attached to the color buttons, the color buttons are shown on screen.
my content
Press to display the My Content menu on or off, see p. 7.
OK
-to activate a setting
-to display the list of channels stored (according to the selection made in the Installation mode (Antenna or Cable), p. 8.
-starts playing content in the Home Multimedia Browser application, p. 22.
menu
Settings menu on/off, see p. 7.
Exit menu from
vol Volume
Press + or - to adjust the volume.
mute
Interrupt the sound or restore it.
av+
Press this button repeatedly to select the source - av1, av2, av3, hdmi, side or TV when in TV mode, according to where you connected the accessory devices (p. 20).
Note : Although this remote control can be used for some other Philips products, it is not an universal remote control.
dvd/r cbl tv vcr aux
Press the Select button repeatedly to select one of the system modes in which the remote control can be used to operate that Philips device.
If no action is undertaken within 60 seconds, the remote control returns to TV mode. After an action in the selected system mode the remote control will remain in this mode for 60 seconds and will then return to TV mode.
Cursor buttons
Press the cursor buttons up/down, left/right to navigate through the menus.
ch/page Channel selection
- To browse through the TV channels or sources stored in the preferred channel list (see p. 19).
- To select between Antenna or Cable TV channels, first make your selection in the Settings menu, see, p. 7.
Note: You don’t have to start the installation again once you have searched for and stored the available TV channels.
a/ch
Press to alternate between the currently viewed channel and the previously viewed
channel.
-
Press the dash (-) for digital channels.
info
Display information: Press to display (when available) information about the selected TV channel and program or accessory device.
Cc
Press to display the transmitted closed captions text on the screen.
Español Française English
To be continued.
