Español Française English
Clear region ratings
This function allows you to clear all the Region Ratings settings.
&Select Clear region ratings with the cursor down.
éPress the cursor right to enter the list. You are asked to enter your code. (See below).
Set/Change PIN
&Select Set or Change PIN with the cursor down.
éIf no
If a
All number combinations from 0000 to 9999 are valid numbers.
“The Menu preferences menu reappears with a message confirming that the PIN has been created.
“Select Start now.
‘Press ok to activate.
Note : The above 2 features (Region ratings lock and Clear region ratings) will be available only in sets manufactured after the
Connect Accessory Devices |
| |||||
| Set Top Box to TV |
| ||||
1a | Using HDMI | |||||
|
|
|
|
|
| |
|
|
|
|
|
| Connect RF cable from wall to input at back of the cable box. |
|
|
|
|
|
| |
|
|
|
|
|
| Set output switch on |
|
|
|
|
|
| channel. |
|
|
|
|
|
| In some cases, cable box will automatically tune to channel 3 or 4. Just change |
|
|
|
|
|
| channels until picture appears. |
|
|
|
|
|
| Connect cable box to TV using HDMI cable. |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| Note : If the accessory device has DVI output only, use a DVI to HDMI adapter |
|
|
|
|
|
| |
|
|
|
|
|
| cable to connect to the HDMI connector. You need to also connect the audio |
|
|
|
|
|
| cable to L and R AUDIO jacks. Next, go to Menu => Setup => Source |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| => Analog Audio In => and select HDMI. |
|
|
|
|
|
| |
|
|
|
|
|
| |
| Using RF Cable |
CABLE / ANTENNA | Connect RF cable from wall to input at the back of the cable box. |
| Use second RF to connect the cable box to the TV's antenna input. |
| This connection gives mono sound. For stereo sound use also composite audio/ |
| video connection (Refer to panel 3). |
1b Set-Top Box to TV
Using Component Video Input
Connect Component Video cable to input at back of the cable box.
Turn on TV and DVD Player/DVD recorder. Press CH+ or CH- on remote control to tune to the video supplied by AV2.
Insert a prerecorded DVD into DVD player/DVD recorder and press
PLAY to verify correct connection.
| AUDIO OUT | CABLE / ANTENNA |
| (DIGITAL) | |
( | ) |
|
20
