25
Access decoder channel
You can map channels provided through a
decoder or descrambler to your TV channel
selection. In this way, you can select these
channels by using the RC of your TV. The
decoder or a descrambler must be connected
to EXT1 (SCART).
Set decoder channel
Map channels from a d ecoder or descramble r.
1 Press MENU.
2 Select [Setup] > [Installation] >
[Decoder].
3 Press to enter [Decoder] menu.
4 Press to select [Channel], the n press
to enter.
5 Select one channe l to map to the
decoder / descram bler channel and press
OK to confirm.
6 Select [Status], then pre ss to ente r.
7 Select [EX T 1] (SCART) the connector
used by the decoder / des crambler.
8 Press OK.
9 Press MENU to exit.
Note
Select • [None] if you d o not want to map to
the decoder / descr ambler channel .
Change TV preferences
Use the preferences m enu to customise your
TV settings.
1 Press MENU.
2 Select [Setup] > [Installation] >
[Preferences].
• [Location]: Optimises TV settings for
your location - home or shop.
• [Volume bar]: Displays the volume
bar when you adjust th e volume.
• [Channel Information]: Displays
information abou t the TV channel
every time you swi tch channels.
Select [Full] to view channel
information or [Off] to tur n off the
channel information.
• [Universal access]: Enables or
disables the universal access menu.
• [EasyLink]: Enables one-touch play
and one-touch st andby between
EasyLink-compliant devices.
• [Pixel Plus Link]: Overrides the
settings of connec ted devices and
uses the settings of the TV. (Available
only when you activ ate Easylink).
• [E-sticker]: For shop mode only. Sets
the location of the e-s ticker.
3 Press to select your preference.
4 Press OK.
5 Press MENU to exit.
English
EN
Downloaded From TV-Manual.com Manuals