TV SETUP MENU & SUB-MENUS
* LANGUAGE (ENGLISH / ESPANOL / FRANCAIS)
When you first enter the TV SETUP Menu, LANGUAGE is highlighted. Scroll to the LANGUAGE item, select other languages with
the Æ or Í button on the remote control.
* CHANNEL INSTALL >
When selected, CHANNEL INSTALL menu appears. Configure
the inputs and channels as seen here.
INPUT
1Select the channel or input you wish to configure.
2Select the channel or input you wish to associate 
with the specific CHANNEL. This feature enables
you to "map"
Note : Although it is possible to map a given video source (eg CVI) to another video source (eg.
| CHANNEL INSTALL |
CHANNEL | TV |
INPUT | ANTENNA / AV2 / SIDE / |
AUTO PROGRAM | > |
CHANNEL RING | SAVED / DELETED |
LABEL | MYLABEL > |
VIDEO BLANK | NO / YES |
AUDIO MUTE | NO / YES |
TV Setup - Channel Install (Commercial Mode)
AUTO PROGRAM
1When AUTO PROGRAM is selected, the TV performs an automatic search for the presence of viable RF signals at its tuner input. An AUTO PROGRAMMING ACTIVE TABLE of active numbers will appear. When a viable signal
is detected on a given channel, that channel is highlighted in red and is added to the channel ring.
2If CABLE TUNING is set to NO, channels 2 through 69 will be checked. When a viable signal is detected on a given
channel, that channel is highlighted in red and is added to the channel ring.
3Pressing any key on the remote control will terminate the AUTO PROGRAM session.
AUTO PROGRAMMING ACTIVE
1 | 2 | 3 | 4 | 5 | 6 | 7 |
8 | 9 | 10 | 11 | 12 | 13 | 14 |
15 | 16 | 17 | 18 | 19 | 20 | 21 |
22 | 23 | 24 | 25 | 26 | 27 | 28 |
29 | 30 | 31 | 32 | 33 | 34 | 35 |
36 | 37 | 38 | 39 | 40 | 41 | 42 |
43 | 44 | 45 | 46 | 47 | 48 | 49 |
50 | 51 | 52 | 53 | 54 | 55 | 56 |
57 | 58 | 59 | 60 | 61 | 62 | 63 |
DIGITAL CHANNEL SEARCH : 22 PRESS ANY KEY TO STOP
AUTO PROGRAM
CHANNEL RING
Specify whether the current channel or input is to be SAVED or SKIPPED from the channel ring (i.e. list of channels available for
selection with a guest remote control).
LABEL
Input a maximum number of 8 characters for the channel's label. Press cursor Æ to start the first character. Cursor Æ or Í to
navigate between character positions within the label field. Cursor Î or ï to select characters from the list
VIDEO BLAN K
If VIDEO BLANK is set to NO. Video will be displayed.
If VIDEO BLANK is set to YES. Video will not be displayed.
AUDIO MUTE
If AUDIO MUTE is set to NO. The current channel is audible.
If AUDIO MUTE is set to YES. The current channel is muted
*CABLE TUN ING (NO / YES)
If CABLE TUNING is set to NO. You are selecting standard
If CABLE TUNING is set to YES. You are selecting cable offset tuning.
12
