Philips 27HT7210D, 27HT4000D owner manual Definitions, Acrynyms & Abbreviations Cont

Models: 27HT7210D 27HT4000D

1 25
Download 25 pages 31.02 Kb
Page 23
Image 23
DEFINITIONS, ACRYNYMS & ABBREVIATIONS (CONT.)

DEFINITIONS, ACRYNYMS & ABBREVIATIONS (CONT.)

RJ-12

Router

RTSP

RTP

Setup Mode

SmartPortTM SmartPlugTM

Socket

SBB

STB

Standby

System 0

System 7

TCP/IP

UDP

YPbPr

Registered jack 12. Modular telephone-style connector form factor with 6 electrical conductors.

Technically, also known as a Layer 2 Switch. A switching hub that operates at the Data Link Layer (Layer 2), and builds a table of the MAC addresses of all the connected stations.

Real-Time Streaming Protocol. Allows control of multimedia streams delivered, for example, via RTP (RFC 3389, Real-time Transport Protocol Payload). Control includes absolute positioning within the media stream, recording and possibly device control.

Real-time Transport Protocol. Defines a standardized packet format for delivering audio and video over the Internet.

See System 7. Remote control mode used to configure Philips Institutional Televisions for specialized and/or restricted features such as front panel lockout, volume range, channel list, etc.

Philips proprietary three-wire synchronous serial communications and control interface.

See SmartPort.

Connector on a cable that connects to socket.

Set-back box. Used interchangeably with "set-top box". General term for a device that adds functionality to, and / or interfaces a television with, a host content- and/or control- environment.

Set-top box. See SBB.

Generally referred to as "off". A state of operation, characterized by relatively low power consumption, in which the unit (television) is connected to an AC power source, but not in active use, and capable of responding to queries or commands from a control device and/or DCM.

First data word of a Philips RC-5 / RC-6 remote control code for standard television commands. Synonymous with Business Display Solutions / ITV "guest" mode.

First data word of a Philips RC-5 / RC-6 remote control code reserved for specialized commands. Used for Business Display Solutions / ITV "setup" mode.

Transmission Control Protocol / Internet Protocol. De facto standard protocol for Internet communications.

User Datagram Protocol. A minimal message-oriented transport layer protocol that is currently documented in IETF RFC 768. Used by Philips NetLink to issue device discovery packets.

Component video signals consisting of luminance, and blue and red components.

23

Page 23
Image 23
Philips 27HT7210D, 27HT4000D owner manual Definitions, Acrynyms & Abbreviations Cont