Philips 29PT8640/12 manual Manual store, Favourite programmes, Other settings in the Install menu

Manual store

This menu is used to store the programmes one at a time.

&Press the H key.

éWith the cursor, select the Install menu then

Manual store :

Main •
Install •
Language •
Country •
Auto Store •
	System •
Manuel Store	Search •
Sort •	Program No. •
Program •	Fine Tune •
Name •	Store •

“System: select Europe (automatic detection*) or Western Europe (BG standard), Eastern Europe (DK standard), United Kingdom

(I standard) or France (LL’ standard).

*Except for France (LL’ standard), you must select

choice France.

‘Search : press ≥.The search starts. Once a programme is found, the scanning stops and its name is displayed (when available). Go to the next step. If you know the frequency of the required programme, this can be entered

directly using the 0 to 9 keys.

If no picture is found, consult the possible solutions (p. 12).

(Program No. : enter the required number with

the ≤≥ or 0 to 9 keys. Example : program

1, enter 01.

§Fine Tune : if the reception is not satisfactory, adjust using the ≤≥ cursor.

èStore : press ≥.The program is stored. ! Repeat steps ‘ to è for each programme to

store.

ç To quit the menus, press d.

Favourite programmes

This menu allows you to select the programmes to be accessed with the @ P # key.

&Press the H key.

éWith the cursor, select the Install menu then

Favourite Progr. and press ≥.

Main •

Install •

Language •

Country •

Auto Store •

Manuel Store •

Sort •

Favourite Progr.	2 •
Name •

The list of favourite programmes is displayed. The programmes that were stored at installation will automatically appear on this list.

“Use the up/down cursor to select the

required programme.

‘Use the left/right cursor to add or remove a

programme from the list.

(Run through steps “ and ‘ for each programme to be added or removed from the list.

§ To exit, press d several times.

Other settings in the Install menu

&Press the H key and select the Install menu: é Language : to change the display language for

the menus.

“ Country : to select your country (GB for Great Britain).

This setting is used for the search, automatic programme sort and teletext display. If your country does not appear in the list, select “. . .”

‘ Auto Store : to start automatic search for all programmes available in your region. If the transmitter or cable network sends the

automatic sort signal, the programmes will be numbered correctly. If this is not the case, you need to use the Sort menu to renumber the programmes (see p. 4).

Some transmitters or cable networks broadcast their own sort parameters (region, language, etc.). In this case, indicate your choice using the <> cursor and validate with ≥.To quit or interrupt the search, press H. If no picture is found, consult the possible solutions (p. 12).

( To quit the menus, press d.

5