Philips 29PT8640/12 Quick installation, Program sort, Program name, Seconds to display the menu

Quick installation

When you turn on the TV set for the first time, a menu is displayed on screen.

This menu prompts you to select the country and language for the menus :

Main •

Install •

Country • DK

GB English

FFrench

DEDeutsch

SF...

...

If the menu is not displayed, press and hold down the ”- and ”+ keys on the TV set for

5 seconds to display the menu.

&Use the <> cursor on the remote control to

select your country and validate with ≥.

If your country does not appear in the list, select choice “. . .”

éNext select your language using the <> cursor and validate with ≥.

“The search starts automatically.All the available TV programmes will be stored. This operation takes a few minutes.

The display shows the progress of the search and the number of programs found. At the

end of the search, the menu disappears. To exit or interrupt the search, press H. If no programme is found, consult the possible solutions p. 12.

‘If the transmitter or cable network sends the automatic sort signal, the programs will be numbered correctly. In this case, the installation is complete.

(If this is not the case, you need to use the Sort menu to number the programs correctly. Some transmitters or cable networks broadcast their own sort parameters (region, language, etc.). In this case, indicate your choice using the <> cursor and validate with ≥.

Program sort

&Press key H.The Main menu is displayed on the screen.

Main •
Install •
Language •
Country •
	00
Auto Store •	01	BBC1
Manuel Store •	02	BBC2
Sort •	03 ÆANGLI
Program •	04	CH4
Name •	05	CH5

éWith the cursor, select the Install menu

followed by the Sort menu.

“Select the programme you want to move using

the <> cursor and press ≥.

‘Then use the <> cursor to select the new

number and validate with ≤.

(Repeat steps “ and ‘ for each program you

wish to renumber.

§ To quit the menus, press d.

Program name

If required, you can give a name to the programmes and external connectors. Note : on installation, the programs are named automatically when an identification signal is sent.

&Press the H key.

éWith the cursor, select the Install menu, then

Name.

“Use the @ P # keys to select the programme to name or rename.

‘Use the ≤≥ cursor to move around the name display area (5 characters) and the <> cursor to select the characters.

(When the name has been entered, use the H

key to exit.The name is stored.

§Repeat steps “ to ( for each programme

you wish to name.

è To quit the menus, press d.

4