Philips 64PH9901 manual Pronto Remote Atsc Digital Features, Pronto Digital TV Mode

PRONTO REMOTE ATSC DIGITAL FEATURES

PRONTO - DIGITAL TV MODE

The Pronto remote contains touchscreen displays for

“DTV” related controls. Use the

Pronto’s touchscreen buttons to

access and adjust the DPTV for

dedicated ATSC mode features, as

well as perform on-screen Menu adjustments and select other

program functions.

alternate audio*	status button
Press to cycle through the available audio	Press to see the current channel number on the DPTV screen.
language tracks for the current DTV program.	Also press to clear the DPTV screen after control adjustments.
(See the additional alternate audio section	dtv freeze
information shown below.)	Press to freeze or stop the current picture on the DPTV screen.
power button
	Program sound will continue to play. Repress the freeze button, or
Press to turn the DPTV ON and OFF.	wait for a 60-second time out, to return to live program action.
	mute button
	Press to turn the sound OFF on the DPTV. Press again to return
	the sound to its previous level.
mute

Note: For battery installation and

other details on the initial use of

the Pronto remote control also

refer to the 64PP9901 Quick Use

guide included with your DPTV.

BEGIN

1Gently tap the Pronto touchscreen with your finger to display its control panel for use.

		TV
power		status
alt audio		dtv freeze
sleep		ext input
analog TV		DTV
1/4	Analog	DTV

channel scan buttons

channel	Press to scan up (+) or down (-) through any ATSC programmed
+
	channel numbers.

volume	volume buttons
+	Press to adjust the DPTV sound level up (+) and down (-).
	ext input button
	Press to select the auxiliary input connections available on
	the rear of the DPTV (analog NTSC - AUX1/2/3; Monitor
	-VGA; and External High Definition - EXT HD).
	TV
	number buttons

Be sure “TV” is selected for the

current device tab item category.

2Press the “DTV” button on the Pronto to ensure ATSC mode commands are sent from the

remote.

STOP

SMART HELP

Due to the amount of

sleep button

Press to set the DPTV to
automatically turn itself OFF.	2/4 Analog	DTV
(15 minutes to 2 hours ahead.)

A/CH button

Press Alternate Channel (A/CH) to select previously viewed channels. Enter the desired two channel numbers (from the Pronto remote’s number buttons), and then press A/CH to toggle back and forth between the two channel selections.

Press two number buttons to select single digit “major” DTV channels. Use a four-digit channel entry to select

ATSC system “sub-channel” programs, for example: press “0, 6, 0, 1” for sub-channel 6.01. (See page 5 in the 64PP9901 Quick Use guide for details on the use and

A/CH selection of sub-channels.)

	TV	TV Guide Plus + buttons
	red	TV Guide Plus+ is not available for
		use within the DPTV’s ATSC or
on/off	yellow	digital TV operating mode. (See the
		separate TV Guide Plus+ program
info	setup green	instruction guide for details on how
		it is used within the analog NTSC
record	blue	operating system.)

optional component and

3/4 Analog DTV

feature uses available with the

Pronto’s Device Reference and

Learn Code lists, please also refer

to the separate full-use Pronto

Owner’s Manual for complete

details on its function and

operations.

Alternate Audio preference: English

*The “alt(ernate) audio” button on the Pronto remote allows the user to select a language preference for multilingual or alternate language audio track programs that may be received for DTV viewing. (English is the default language setting.)

When digital broadcast material is received which contains multiple language soundtracks the DPTV will identify, find, and then select the preferred alternate audio language for sound playback. If the selected language preference is not available within the received program material, the default audio language is then selected.

menu buttons

Press the Menu (or M) button to show on-screen controls. Press M ▲ or ▼ buttons to move up (or down) the list of DTV controls. Press the (M) ◀ or

▶buttons to make adjustments to the selected controls.

exit button

Press to clear the DPTV screen after control adjustments. Also press to see the current channel number on the DPTV screen.

scroll arrows

Press to move to the next (or previous) page of Pronto controls. The touchscreen will display the current control screen’s page number, and the total number of pages available for the selected device (1/4; 2/4; etc.)

TV

menu

M

exit

4/4 Analog DTV

40